 |
| Quantity: | |
|---|---|
Engineered with a side-mounted inlet/outlet configuration, this filter features a robust carbon steel or stainless steel housing and can accommodate 1-10 filter bags per housing, making it ideal for applications requiring high flow rates (up to 500 m³/h) with minimal space usage.
Efficient Filtration Design
Side Entry Advantage: Tangential flow reduces turbulence, achieving 15% lower pressure drop compared to top-entry filters (ΔP ≤0.5 bar at rated flow).
Bag Compatibility: Fits standard 10", 20", 30", 40" filter bags (polypropylene, polyester, nylon) with micron ratings from 0.5 to 200 microns.
Durable & Leak-Proof Construction
Housing Materials: Carbon steel (with epoxy coating), 304/316L stainless steel, or Hastelloy for corrosive environments (pressure rating: up to 16 bar).
Double O-Ring Seal: Patented closure system ensures zero leakage, validated through 10,000-cycle pressure testing.
Maintenance Efficiency
Quick Bag Replacement: Side access door allows filter bag change in <5 minutes without system shutdown (ideal for parallel filtration setups).
Anti-Caking Design: Tapered housing interior prevents particle accumulation, reducing cleaning frequency by 40%.
Customizable Configurations
Multi-Bag Arrangements: 1, 2, 3, 5, or 10 bag configurations for flow rates from 10 to 500 m³/h, with optional pressure gauges and differential pressure switches.
Lifting Lugs: Standard on 3+ bag housings for easy installation in elevated filtration skids.
Water Treatment:
Pre-filtration of reverse osmosis systems, cooling tower water, and industrial wastewater.
Chemical Processing:
Filtration of paints, inks, adhesives, and solvents to remove oversize particles and contaminants.
Food & Beverage:
Clarification of edible oils, syrups, and beer; removal of particulates in dairy processing.
Petrochemical:
Filtration of lubricating oils, hydraulic fluids, and crude oil feedstocks in refinery units.
Q: How do I choose the right filter bag material?
A: Polypropylene is ideal for acidic liquids, polyester for alkalis, and nylon for high-temperature applications (up to 150°C).
Q: Can the filter handle viscous liquids?
A: Yes, optional flow diffusers and larger bag surface area (up to 2.5 m² per bag) optimize filtration for viscosities up to 500 cSt.
Q: What is the maximum operating temperature?
A: Stainless steel housings handle up to 120°C; exotic alloys extend this to 200°C for high-temperature processes.
Q: How often should filter bags be replaced?
A: Replacement depends on particle loading, but a pressure increase of 1 bar typically indicates bag saturation.
Side entry bag filter
Operating Conditions
Max operating pressure | 0.6MPa、1.0MPa |
Max operating temperture | 150℃ |
Material
Shell | 304, 316L, Duplex SS, Titanium,Hastelloy |
Eyebolt | 304 |
Stabilizer Blade | 304 |
O-ring |
EPDM, PTFE, Viton, Silicone |
Connection
Connection of shell | Flange |
In-outlet N1、N2 | Flange, Tn-clamp, Thread |
N3 Pressure gauge (option) | 1.5"Tri-clamp(1#Bag/2#Bag) M14×1.5 Female thread (3#Bag/4#Bag) |
N4Vent valve (option) | 1/4"Male thread |
Surface Finish
Finish Type | Mechanical/ Eiectrolytical polishing Sand blasting |
Polishing Precision | Inner surface Ra≤0.6μm Outside surface Ra≤0.8μm Basket 0.6μm |
Dimension Parameters
| Parameters | Molded cover/flat cover | Cover | ||
1# | 2# | 3# | 4# | |
A: Total height | 990 | 1365 | 525 | 635 |
B: The distance from inlet to center | 147 | 92 | ||
G: Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1: The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2: The height from outlet to ground | 250 | 300 | ||
In-outlet N1、N2 Size | 1.5 or 2 | 1 or 1.5 | ||
E: Stabilizer blade | 500 | 800 | 300 | 400 |
Max fiow m3/h | 20 | 40 | 6 | 12 |
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty of Bag Filter | Modal of Bag Fiter | Shell Material | In-outler comection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
Engineered with a side-mounted inlet/outlet configuration, this filter features a robust carbon steel or stainless steel housing and can accommodate 1-10 filter bags per housing, making it ideal for applications requiring high flow rates (up to 500 m³/h) with minimal space usage.
Efficient Filtration Design
Side Entry Advantage: Tangential flow reduces turbulence, achieving 15% lower pressure drop compared to top-entry filters (ΔP ≤0.5 bar at rated flow).
Bag Compatibility: Fits standard 10", 20", 30", 40" filter bags (polypropylene, polyester, nylon) with micron ratings from 0.5 to 200 microns.
Durable & Leak-Proof Construction
Housing Materials: Carbon steel (with epoxy coating), 304/316L stainless steel, or Hastelloy for corrosive environments (pressure rating: up to 16 bar).
Double O-Ring Seal: Patented closure system ensures zero leakage, validated through 10,000-cycle pressure testing.
Maintenance Efficiency
Quick Bag Replacement: Side access door allows filter bag change in <5 minutes without system shutdown (ideal for parallel filtration setups).
Anti-Caking Design: Tapered housing interior prevents particle accumulation, reducing cleaning frequency by 40%.
Customizable Configurations
Multi-Bag Arrangements: 1, 2, 3, 5, or 10 bag configurations for flow rates from 10 to 500 m³/h, with optional pressure gauges and differential pressure switches.
Lifting Lugs: Standard on 3+ bag housings for easy installation in elevated filtration skids.
Water Treatment:
Pre-filtration of reverse osmosis systems, cooling tower water, and industrial wastewater.
Chemical Processing:
Filtration of paints, inks, adhesives, and solvents to remove oversize particles and contaminants.
Food & Beverage:
Clarification of edible oils, syrups, and beer; removal of particulates in dairy processing.
Petrochemical:
Filtration of lubricating oils, hydraulic fluids, and crude oil feedstocks in refinery units.
Q: How do I choose the right filter bag material?
A: Polypropylene is ideal for acidic liquids, polyester for alkalis, and nylon for high-temperature applications (up to 150°C).
Q: Can the filter handle viscous liquids?
A: Yes, optional flow diffusers and larger bag surface area (up to 2.5 m² per bag) optimize filtration for viscosities up to 500 cSt.
Q: What is the maximum operating temperature?
A: Stainless steel housings handle up to 120°C; exotic alloys extend this to 200°C for high-temperature processes.
Q: How often should filter bags be replaced?
A: Replacement depends on particle loading, but a pressure increase of 1 bar typically indicates bag saturation.
Side entry bag filter
Operating Conditions
Max operating pressure | 0.6MPa、1.0MPa |
Max operating temperture | 150℃ |
Material
Shell | 304, 316L, Duplex SS, Titanium,Hastelloy |
Eyebolt | 304 |
Stabilizer Blade | 304 |
O-ring |
EPDM, PTFE, Viton, Silicone |
Connection
Connection of shell | Flange |
In-outlet N1、N2 | Flange, Tn-clamp, Thread |
N3 Pressure gauge (option) | 1.5"Tri-clamp(1#Bag/2#Bag) M14×1.5 Female thread (3#Bag/4#Bag) |
N4Vent valve (option) | 1/4"Male thread |
Surface Finish
Finish Type | Mechanical/ Eiectrolytical polishing Sand blasting |
Polishing Precision | Inner surface Ra≤0.6μm Outside surface Ra≤0.8μm Basket 0.6μm |
Dimension Parameters
| Parameters | Molded cover/flat cover | Cover | ||
1# | 2# | 3# | 4# | |
A: Total height | 990 | 1365 | 525 | 635 |
B: The distance from inlet to center | 147 | 92 | ||
G: Shell diameter | φ204 | φ204 | φ114 | φ114 |
D1: The height from inlet to ground | 835 | 1205 | 445 | 555 |
D2: The height from outlet to ground | 250 | 300 | ||
In-outlet N1、N2 Size | 1.5 or 2 | 1 or 1.5 | ||
E: Stabilizer blade | 500 | 800 | 300 | 400 |
Max fiow m3/h | 20 | 40 | 6 | 12 |
The above-mentioned data is the standard, it can customize according to customer's requirements.
Selection Table
Qty of Bag Filter | Modal of Bag Fiter | Shell Material | In-outler comection | O-ring |
1P | 2S | 4 | F | E |
1P=1Pc | 1S=1#Bag:φ180×430 | 4=304 | F=Fange | E=EPDM |
2S=2#Bag:φ180x810 | 6=316L | K=Tri-clamp | P=PTFE | |
3S=3#Bag:φ105×230 | D=Duplex SS | L=Thread | V=Viton | |
4S=4#Bag:φ105x380 | T=Titanium | S=Silicone | ||
H=Hastelloy |
